Top Soil vs. Fill Dirt vs. Compost: What Your Yard Needs

October 13, 2026 · Team Herrera Landscaping

Hands holding rich, dark soil, seen from above

Order "dirt" from three different suppliers and you can get three very different products. The difference matters. A new lawn laid on fill dirt struggles. A low spot raised with compost settles and sinks. Here is a plain breakdown of the three materials homeowners ask us about most, and where each belongs.

Fill dirt: for building up, not for growing

Fill dirt is subsoil, the material that sits below the top layer of the ground. It is typically low in organic matter and nutrients and may contain clay, sand and rock. That sounds like a negative, but for some jobs it is exactly what you want. Because it has little organic material, it does not decompose and settle as much over time.

Fill is used for:

  • Raising low areas and filling holes.
  • Building up grade, for example to slope ground away from a foundation.
  • Backfilling behind walls or around structures, where appropriate.

Fill is the base, not the finish. Anything you want to grow on top of it needs a layer of real top soil.

Top soil: the growing layer

Top soil is the upper layer of soil, where most plant roots live. Good screened top soil is loose, dark, free of large stones and debris, and contains organic matter. It holds moisture while still draining.

Top soil is the right choice for:

  • Preparing ground for a new lawn, whether you plan to seed or lay sod.
  • Leveling minor dips in an existing lawn.
  • Topping off fill so plants have something to root into.
  • Building or refreshing garden beds.

Quality varies a lot. Unscreened material can be full of rocks, roots and weed seeds. When we bring in top soil, we look at what is going down before it is spread.

Compost: a soil amendment

Compost is decomposed organic material such as leaves, yard trimmings and other plant matter. It is not a stand-alone growing medium. Its job is to improve the soil you already have. Mixed into clay, it helps loosen structure and drainage. Mixed into sandy soil, it helps hold water and nutrients.

Compost is useful for:

  • Working into garden and planting beds.
  • Thin topdressing over a lawn, often after aeration.
  • Blending with top soil for raised beds.

Because compost breaks down over time, using a deep layer of it to raise grade leads to settling.

A common New Jersey scenario

Many New Jersey yards, especially around newer homes, sit on compacted subsoil where the original top layer was stripped or buried during construction. Lawns there often thin out no matter how much they are fertilized, because roots cannot get down. In those yards, loosening the ground and adding a few inches of decent top soil before seeding often does more than any product. Our post on common New Jersey lawn problems covers compacted soil in more detail.

How much should you order?

Like mulch, soil is sold by the cubic yard. Multiply the area in square feet by the depth in feet, then divide by 27. For example, a 500 square foot area at four inches deep is 500 times 0.33, which is about 165 cubic feet, or roughly 6 cubic yards. Loose soil compacts when it is raked and rolled, so plan for a little extra.

Test before you guess

Rutgers offers soil testing that reports pH and nutrient levels. A test tells you whether your problem is the soil itself or something else, and it is the basis for any phosphorus applied to a lawn under New Jersey's fertilizer rules, which we explain in our fertilizer law guide.

Quick reference

  • Raising a low spot or changing grade: fill dirt, capped with top soil.
  • New lawn or lawn repair: top soil.
  • Improving beds or tired soil: compost mixed in.

Get the right material, spread the right way

We deliver and spread top soil as part of lawn and bed projects, and we can tell you what your yard actually needs. Book an appointment or call (609) 575-6213.

Next steps

Ready for a lawn you are proud of?

Book a free consultation and a member of Team Herrera will walk your property with you, talk through what it needs and explain your options. No pressure, no cost.